Posts Tagged ‘Certapro Painters in Winona Mn’

Painting Exterior Brick Winona Mn

GREAT Paint Contractors Give Professional, Detailed Quotes A GREAT painting quote includes a detailed list of ALL aspects of work to be done:   FREE Power Washing Caulking, sanding and priming Trim repair - GREAT contractors will know what needs to be done Details of products and application - GREAT contractors know the right products for every job Touch-ups and clean-up In addition to the quote's content and accuracy, is it presented professionally?

Looking for Painting Exterior Brick  in Winona Mn ?

 

Industrial Paint

 

Is the quote printed on company letterhead? Does the sheet show the contractor's license number? Does he use a local land line phone number? (beware if only a cellular phone number is listed) TAX I.D. number? Work guarantee and relevant product warranties? Inexperienced contractors, using standard business forms purchased at office supply stores suggests they haven't invested much in their business and may not be properly licensed. Also, they may not be paying income taxes.

GREAT Paint Contractors Have an A or A+ Better Business Bureau Rating the Better Business Bureau (BBB) is a trusted consumer rating body that grades businesses based on collective criteria. In addition to finding their grade, be sure to check how long the paint contractor has been a member. Also confirm that any complaints have been resolved. BBB will still afford a good rating if a business has addressed

Lead Safety Certification Required For Certain Residential Projects

 

Cost To Paint Exterior Of House

 

You're probably familiar with the old expression, "there's more than one way to skin a cat". Like you, I'm pretty sure I don't want to know about any one of them. But it does illustrate a good point when it comes to estimating a painting project or any other trade estimates for that matter.No matter what the facet of renovation you're planning, whether it's painting, carpentry, drywall or you name it, there are as many bid prices as there are ways to get the job done. But an estimator's quote usually only accounts for one scope of work, one method of doing it and one quality level of materials. Then, of course, if you simply choose the lower bidder, you know you're most likely missing out on better skilled trades and better materials and an overall better experience! So how can you get the best painter for the job (or drywaller, or carpenter) to suit your budget?My expertise is in the painting trades so I'll use painters and paint jobs here as our guide. But you can apply this to most any other trade from both a consumer prospective as well as a contractor's. And no matter what your trade, if you're good at what you do and take excellent care of your customers, you're likely not always the lowest bidder. But if you're like my painting company, you seek to provide homeowners and commercial clients with the best value for their money. Unfortunately, because people don't tend to hire painters every day and rarely know one from another, contractors are too often selected by price alone which has been derived from the scope of work they've been given by the customer (as an overall "wish list" in some cases) but without the benefit of knowing their budget. So here we have a large assortment of variables (what must be done now and what can wait?, what can the customer spend? and what quality of materials meets both purpose and price?) that somehow have to all come together in a package which benefits both the customer and the contractor without truly knowing what each other needs until a quote is put up for discussion. And all too often, that's too late!If you, as a homeowner show three painting contractors the same scope of work, each one will come back to you with a different price based on the "pay grade" of their painters, the thoroughness of their prep work (or lack thereof) and the quality of paints and primers they propose to use. And the fact is, each job and customer has different needs and expectations which fall somewhere along the full spectrum of these variables. Some want a "white wash it for now" approach and others want a full scale restoration that will last for decades. But most are looking for something in between. And as a responsible painter, you propose the best quality for your customer because you want them to be happy with results for years to come but you aren't sure if it's within their budget. And as a painting customer, you want the best you can afford but have little or no idea what that particular level of quality includes. So even though each wants the best for the project at hand, this usually ends up with the painting estimate being dismissed by the customer because the price is "too high". And this is despite the customer would otherwise prefer to work with this contractor because of all the obvious signs of professionalism and knowledge of their craft. But instead, the customer too often rolls the dice with the lower bidder and hopes for the best (which never comes).So how do you get that contractor you instinctively know will deliver the goods but has proposed a bid that's out of your price range or seems much higher than the other quotes?Talk to them!Those of us who want to stay at the top of our trade will most often lead with our best foot forward and bid with top quality materials and workmanship unless the customer tells us otherwise. We want to hear your thoughts! We are here for nothing more than to serve your best interests with the project at hand. And the more we know, the better we can meet your needs and expectations.So before dismissing a reputable contractor who's demonstrated professional conduct and offered knowledgeable advice with, "Sorry. Your quote was too high. We've given the job to another painting contractor", look over all the quotes carefully and together. Compare what details are the same and which are different. Where items differ or are none existent, get them clarified by the estimator so you've got a clear sense of what each is actually offering you to determine the best value - not price. And if you still find that the better contractor for the job is priced out of your range, ask them to consider other ways they could deliver the job at a lesser cost such as using a different paint line, or perhaps adjusting the scope of work to get the most critical aspects addressed now and leave the rest to another date. These are just a couple of examples that can affect a quote but if you discuss this direction with a professional, they're usually all too happy to help you find the best ways to tailor your project to suit you and still give you all the benefits of dealing with a reputable contractor who will stand behind their work.And as a contractor, don't just offer the customer a proposal with only your best recommendations for the work and leave them to fend for themselves with your competitors. Let them know that your estimate is based on your expert opinion as to the best practices and materials for the job but that you're willing to change the varying aspects of the job if needed to suit their budget.This is how we get the right contractors together with the right customers for the benefit of all.

 

Best Painting Exterior Brick in Winona Mn

 

As with many things in life, often there is a silver lining in the cloud that's raining on your parade. Many homeowners suffered loss during the 90s from having to replace the faulty Louisiana Pacific wafer board siding on their homes. While some homeowners were rewarded money for their losses some unfortunate homeowners who arrived late were rewarded noting. As frustrations rose to a deafening level during the nineties, most barely noticed the new product that was just entering the market.During this period of time a new type of siding entered the market that offered the durability that most homeowners demanded. It was perfect timing for a cement based siding to enter the market. Many homeowners and builders rushed to buy HardiePlank to replace the decaying siding that plagued the housing industry. Finally a siding existed that would probably outlast the owner. Most folks viewed this siding as an answer to prayer.Most painters in our industry welcomed the siding. Not having to deal with swelling siding that wouldn't hold paint, certainly made our job easier. While most homeowners and painters were excited about this new long lasting siding, most weren't aware that keeping it caulked would become the new problem that everyone would talk about. The problem was and still is: How do you keep HardiePlank caulked? For homes that have exposure to sunlight and widely varying temperatures, keeping HardiePlank properly caulked is a challenge. HardiePlank expands and contracts a lot under these conditions. Most caulks simply do not have the elasticity to handle the expansion and contraction.I have seen the expansion and contraction of HardiePlank siding pull fresh caulk apart within 24 hours after application. It's great siding to have on your home, but you better know what you're doing when it comes to caulking all the joints.You certainly can't be economy minded with your purchase of caulk when HardiePlank is involved, or you will be doing the job over again. Many painters and homeowners alike seem confused when selecting caulk for this siding. It has been my experience that you should be using caulks that comply with either ASTM C 834 or ASTM C 920. Applying a caulk that falls in this category is doing so within the manufacturers written instructions.I personally prefer using an elastomeric caulk on my customer's homes. Elastomeric caulks are made for masonry substrate surfaces. Sherwin Williams carries a product called Shermax Super Stretch Elastomeric Caulk that I find works well with Hardie Plank Siding. It has the elasticity to handle the constant expanding and contracting of Hardie Plank. All my crews are required to use this product and I see few problems with caulk separation. One common problem that many homeowners find is the Hardie Plank itself was installed improperly. At least a 1/8 inch gap between siding and trim should be left by the installer to allow for a proper amount of caulk to be applied. The 1/8 inch gap is in accordance with caulking manufacturers written instructions. (leave 1/8" gap between siding, trim and butt joints so adequate caulk can be applied.) If less than 1/8 inch gap is available to apply caulk, then the caulk is too thin to handle the amount of stretching it must endure. I have seen Elastoplast Caulk separate where less than a 1/8 inch of a gap existed in the siding joints. Owens Corning also sells a very good caulk for this type application. The last point I want to make is there are solutions to this common annoyance. As a painter it is your responsibility to deliver a product and service that will last. As a homeowner make sure you discuss your painter's plans on how he is going to solve this common problem with Hardie Plank. This action will go a long way toward avoiding loss of time and money.

 

Painting the Exterior of Your Home - Do it Yourself, Or Hire a Professional?

 

Price To Paint Exterior Of House

 

The Lead Safety Certification for home renovation, repair and painting is a new requirement of the EPA (Environmental Protection Agency) for spring 2010. It is imperative if a home is built before 1978, to use a painting contractor who is certified for Lead RRP (Renovation, Repair and Painting).This certification ensures that your paint contractor is educated and capable of testing your home for lead, quoting lead removal, and safely painting homes built before 1978. Those certified are able to test for lead and then proceed to prepare, clean and paint the home properly. As a certified RRP for homes with lead present, these painting contractors will use proper containment procedures outlined by the EPA. Since it is your home, it is important to answer one crucial question: Why is lead dangerous to your family? Lead is very dangerous to children, and can cause damage to the brain and nervous system. Pregnant women are also in danger of lead paint causing damage to their unborn child. Adults can be affected by having high blood pressure, and different types of physical fatigue. Lead exposure can cause permanent damage and should be properly prevented by using a certified paint contractor.Certified contractors have been taught the correct way to test for possible lead paint throughout the home. Surfaces that are suspected to have lead paint need to be scratched to the bare wood, ¼", and the testing device should be used over the area to check for traces of lead. Once the test is complete, a formal lead sheet will be provided to the homeowner outlining any problem areas. If lead is present, the homeowner must sign the form acknowledging the issue before the paint contractor is able to move forward with starting the painting project.In order to contain lead on an interior painting jobsite, the painter should cover everything in the room; including all vents, windows and doors that may be open, as well as taping all covers to the floor and walls to ensure no saturation into other areas. Containing lead on an exterior painting job site requires plastic sheets be spread out and taped to the wall, along with a barrier set up around the work area. A certified painting contractor like Sharper Impressions Painting will test a home prior to painting to determine if lead is present. The painter will then contain the lead dust, water run off and chips, and proceed to apply two coats of safe, non-toxic water borne acrylic latex paint or stain on the home. For more information, check out their professional painting blog.

Great Painting Exterior Brick Mn

A GREAT Paint Contractor Presents Proof of Insurance While a good paint contractor may tell you he's insured, a GREAT contractor presents a copy of his policy, proving the amount of coverage, he carries for both property damage and bodily injury that may result from the contractor's work. By nature, paint materials are highly flammable and, should a tragedy occur, you need to know your contractor is sufficiently insured.

 

Professional Painters Near Me

 

As with many things in life, often there is a silver lining in the cloud that's raining on your parade. Many homeowners suffered loss during the 90s from having to replace the faulty Louisiana Pacific wafer board siding on their homes. While some homeowners were rewarded money for their losses some unfortunate homeowners who arrived late were rewarded noting. As frustrations rose to a deafening level during the nineties, most barely noticed the new product that was just entering the market.During this period of time a new type of siding entered the market that offered the durability that most homeowners demanded. It was perfect timing for a cement based siding to enter the market. Many homeowners and builders rushed to buy HardiePlank to replace the decaying siding that plagued the housing industry. Finally a siding existed that would probably outlast the owner. Most folks viewed this siding as an answer to prayer.Most painters in our industry welcomed the siding. Not having to deal with swelling siding that wouldn't hold paint, certainly made our job easier. While most homeowners and painters were excited about this new long lasting siding, most weren't aware that keeping it caulked would become the new problem that everyone would talk about. The problem was and still is: How do you keep HardiePlank caulked? For homes that have exposure to sunlight and widely varying temperatures, keeping HardiePlank properly caulked is a challenge. HardiePlank expands and contracts a lot under these conditions. Most caulks simply do not have the elasticity to handle the expansion and contraction.I have seen the expansion and contraction of HardiePlank siding pull fresh caulk apart within 24 hours after application. It's great siding to have on your home, but you better know what you're doing when it comes to caulking all the joints.You certainly can't be economy minded with your purchase of caulk when HardiePlank is involved, or you will be doing the job over again. Many painters and homeowners alike seem confused when selecting caulk for this siding. It has been my experience that you should be using caulks that comply with either ASTM C 834 or ASTM C 920. Applying a caulk that falls in this category is doing so within the manufacturers written instructions.I personally prefer using an elastomeric caulk on my customer's homes. Elastomeric caulks are made for masonry substrate surfaces. Sherwin Williams carries a product called Shermax Super Stretch Elastomeric Caulk that I find works well with Hardie Plank Siding. It has the elasticity to handle the constant expanding and contracting of Hardie Plank. All my crews are required to use this product and I see few problems with caulk separation. One common problem that many homeowners find is the Hardie Plank itself was installed improperly. At least a 1/8 inch gap between siding and trim should be left by the installer to allow for a proper amount of caulk to be applied. The 1/8 inch gap is in accordance with caulking manufacturers written instructions. (leave 1/8" gap between siding, trim and butt joints so adequate caulk can be applied.) If less than 1/8 inch gap is available to apply caulk, then the caulk is too thin to handle the amount of stretching it must endure. I have seen Elastoplast Caulk separate where less than a 1/8 inch of a gap existed in the siding joints. Owens Corning also sells a very good caulk for this type application. The last point I want to make is there are solutions to this common annoyance. As a painter it is your responsibility to deliver a product and service that will last. As a homeowner make sure you discuss your painter's plans on how he is going to solve this common problem with Hardie Plank. This action will go a long way toward avoiding loss of time and money.


Minnesota Painter Contractor